|
|
| Fluid Flushes |
 |
Fuel/Air Induction Service
Problem:
Deposits accumulate on intake valves, injectors, ports, fuel injectors and combustion chambers causing loss of power, rough idle, hesitation, misfire, pinging, knocking, mileage and hard starting.
Solution:
- Clean fuel injectors
- Clean throttle body
- Clean plenum and air-intake
- Clean intake valves and ports
- Remove combustion chamber deposits
- Correct balance of fuel and air in system
Result:
- Reduced emissions
- Restored horsepower
- Increased fuel economy
- Starts and idles smooth and runs quieter
See the results:
Cooling System Service
Problem:
Coolant is depleted of buffering ingredients and becomes extremely corrosive, literally eating holes in cooling system components. By-products of corrosion damage, as well as rust and scale, clog the passageways that conduct the water through the radiator and choke off the flow. This may result in an overheated engine that may be damaged beyond repair.
Solution:
The entire cooling system is first cleaned and then all debris and worn out coolant is completely removed from the system. Then, fresh new premium coolant is added. Conditioners are also included to prevent rust and corrosion and BG Universal Cooling System Sealer is also included to prevent leaks.
Transmission Service
Problem:
After 30,000 miles, transmission fluid begins to show its age as it turns brown in color and oxidizes due to the combination of time and heat. Deposits begin to form around the transmission's many moving parts, resulting in valves that stick and gears that slip or are sluggish and chatter as they shift.
Solution:
Rather than just removing the fluid found in the bottom of the pan, the entire transmission is cleaned and replenished with the use of special equipment. The transmission and its torque converter have all of their old contaminated fluid removed while new fluid and premium conditioners are added.
One of the hardest working parts of your vehicle will shift smoothly and effortlessly for many more trouble-free miles.
See the results:
Power Steering Service
Problem:
The power steering pump produces high pressure between 800-2000 pounds, with high heat. This leads to fluid breakdown and failure.
Symptoms include groaning and whining noises, erratic steering and pump leaks.
Solution:
A powerful cleaner suspends and dissolves varnish and gums in the power steering system and then all of the old fluid is replaced with new high-tech power steering fluid for both conventional sector and rack and pinion. The benefit will be a quieter-operating, longer lasting power-steering system.
Engine Oil Flushes
Oil Changes Are Not Enough
While oil filters remove particulate over 25 microns, sludge, tar, varnish, and wear metals less than 25 microns continue to circulate within the engine and accumulate within the passageways, oil pump and oil pan. These contaminants cause engine wear, higher operating temperatures, and reduced lubrication.
Past Procedures Compound the Problem
Simply pouring chemical flush additives into the crankcase may be ineffective. With this approach, dissolved sludge, particulate and accumulated debris circulate causing significant engine wear.
Bilstein R-2000 Engine Flush System
This system cleans your engine by using patented adaptors and specially formulated solutions to dissolve accumulations of sludge, tar, varnish and wear metals.
The process is performed with the engine off. Using pulsating pressures, the Bilstein R-2000 Engine Flush System circulates a heated petroleum distillate solution through the crankcase, oil passageways and oil pan to dissolve sludge.
A clean engine means better performance, superior fuel economy and longer engine life.
Restore Engine Efficiency With Total Safety
The Bilstein R-2000 Engine Flush will not harm your engine, ring seating, valve guides or seals. All residual oil and cleaning solutions are evacuated leaving a light mineral oil on critical wear surfaces.
Periodic Engine Cleaning Extends Engine Life
Tests have shown that periodic sludge removal restores operational efficiencies and reduces harmful exhaust emissions. By reducing wear metals and corrosive contaminants a longer life can be expected.
Bilstein - Quality and Reliability
|
|
|
